Posts by Maisy Wilcox

Common Mistakes That Spell Future Emergency Plumbing Needs

Plumbing is one area in a home that requires attention now and then. Plumbing emergencies can spring up on a homeowner anytime and often require immediate attention. There are, however, some plumbing emergencies that homeowners call upon themselves that develop slowly with time. These emergencies are those that result from some practices within the home that directly affect plumbing. The following are common household mistakes in several homes across the globe that often results in the homeowner calling emergency plumbers.

Joining dissimilar metals or using wrong connectors

Many people like to take on plumbing as DIY projects. The mistake, however, occurs when joining pipes; they concentrate more on the size and fitting than material similarity. Many homeowners will join a lead pipe with iron pipes, steel, or even plastic, depending on what is the right size and is readily available to them.  For a start, this poses a threat from dielectric corrosion. This is when different metals begin corroding each other when exposed to environmental factors due to their differences in particulate properties. Dielectric corrosion often results in the blockage, breakage or simply cracking of such joints. With time, this DIYer will require emergency plumbers at his or her house.

Washing construction materials in sinks

This is a very common mistake with many homes. After that accomplished feeling from the DIY job, you took the cans and equipment you used for your project and washed off the paint, cement, or joint compound from your tools. It is a commonly overlooked action. These materials, however, can end up drying within the plumbing and cause it to back up. Many emergency plumbers attest to being called because of backed up pipes only to find cement, soil from small projects and other construction compounds to be the main problem. These DIYers were certainly asking for emergency plumbing. Always wash your tools with water in locations other than sinks directly connected to your plumbing.

Weight on fixtures

Do you know how many homes have soap racks hanging from shower faucets? Or how many people use the bathtub spout as footrests? Faucets and other plumbing components are not meant to carry much, if any, weight. Homes that subject these areas to constant weight, irrespective of how little, are simply ruining the joints in the faucets. With time, calling emergency plumbers to these homes is inevitable.

Incorrectly using the garbage dipsosal

Despite extensive discussions in many settings, people still dispose of almost everything in their garbage disposal. Maybe the name “garbage disposal” wrongly leads many to assume the machine can handle everything. Emergency plumbers will advise you not to dispose a myriad of garbage into these machines. Surprisingly, potato peels, watermelon rinds, and even pumpkin carvings are some of the garbage not suitable for the garbage disposal. They easily block the blades and have to be physically removed by emergency plumbers.

For more tips on actions to avoid to protect your pipes, contact a local plumbing company like P1 Plumbing & Electrical

Read More

Handy Maintenance Tips for Your Concrete Driveway

Concrete driveways tend to be a popular option for homeowners because of their durability. This material is an aggregate of various materials including gravel, stone and sand. Once these materials have been mixed, they create a hard slab that continues to harden over time, making it great for the high impacts driveways experience. However, if not well maintained, your driveway can begin to crack and appear scaly over time. This may eventually lead to the needed replacement of your driveway, as its structural integrity will have become compromised. To avoid the occurrence of costly repairs, here are some handy maintenance tips that you can keep in mind.

Cure you concrete driveway

To enhance the longevity of your concrete driveway, it needs to be properly cured once it has been installed. One thing to note is that concrete driveways require water to ensure that all the aggregates it is comprised of mesh accordingly. However, if the driveway dries out too fast, then the curing will cease prematurely. This causes your driveway to be weak. So what can one do to ensure the curing process proceeds accordingly? The first measure to take is ceasing to use the concrete driveway for a few days so as to let it dry without being rushed. In addition to this, you should steer clear from de-icing salts that contain ammonium sulphate if your concrete driveway is brand new. Lastly, do not embark on any landscaping or digging adjacent to the concrete driveway as this could interfere with its support grade before it has completely set.

Seal your concrete driveway

A common misconception that some homeowners have is that your concrete driveway only requires sealing during the installation process. The truth of the matter is that these driveways are never too old to be regularly sealed. Sealing is one of the best way of ensuring that your concrete driveway does not develop premature cracks. Before sealing your driveway, ensure that it is free of any debris and oils by opting to power wash it. Once it is spick and span, the sealant can be applied uniformly on the driveway. Once you have sealed your concrete driveway, it does not mean that you should not take extra precautionary measures to keep it well maintained. For instance, during the snowy months, ensure that you shovel the concrete driveway on a regular basis so as to prevent any moisture from seeping into is and forming ice within it. In addition, only use plastic shovels to get rid of snow as metal shovels may cause tears on your driveway’s surface.

Contact a company like Aclass Concrete & Landscape for more information on concrete driveways.

Read More

Determining whether or not you need to underpin your home

Our house is one of our most valuable assets that we own and is something we make sure will remain in great condition for years to come. You want to make sure that a solid foundation is set when you are building your home in order to prevent problems from developing in the future.

The process of underpinning the foundation is aimed at strengthening the area underneath the loads of the foundation to ensure that it is adequately reinforced or repaired. There are many different types and methods when it comes to underpinning your home. To best equip yourself to make the right choices, you need to know what the structure of the foundation is like, what type of supports are currently being used and what factors have caused the foundation to become damaged.

Here is some advice to help you determine if you need to underpin your home as well as which method you should use.

When do you need to underpin your foundations?

Not every type of foundation problems can be repaired through underpinning. The main reason underpinning is used as a repair method is when the foundation is no longer able to hold the pressure of the current structure that is built on it.

One of the main reasons that this problem occurs is due to soil that is unstable and weak. This may have resulted from other excavations or simply weathering. If any of these types of problems are present, your home needs to be underpinned.

Underpinning methods

You need to identify which underpinning process is the right choice for your specific situation. The mass concrete underpinning method is suited for foundations that need shallow underpinning and the weak soil needs to be excavated and replaced with poured concrete. This will add considerably more strength to the foundations as the concrete is much stronger and better at load bearing than the soil that was previously there.

The beam and base method of underpinning incorporates concrete bases as well as using beams to support the foundation. The load of the structure is transferred to the concrete beam that is built underneath it. The beams will spread the weight out evenly throughout the concrete structure that is poured underneath the beams.

Using the mini-piled underpinning method involves the transferring of the load of the foundation and the structure to those stable soils that are found very deep under the ground. The piles that are constructed are made from steel and they are driven into holes in order to provide additional support to the load.

Read More

Protect Your Employees: Six Reasons You Should Tint the Windows of Your Business’s Fleet of Vehicles

If you have a fleet of vehicles for your business, consider tinting their windscreens and windows. Window tinting can benefit you, your employees and your vehicles. Here are the top six ways how:

1. Tinted windows reduce risk of skin cancer.

By preventing UV rays from reaching inside the vehicle, window tinting helps to reduce the driver’s risk of contracting skin cancer. Unfortunately, skin cancer is the third most common form of cancer in Australia, but by tinting the windows of your fleet, you help protect your employees.

If they spend all or even a significant portion of their day driving, tinting may be a lifesaver.

2. Tinted windows may protect your liability.

By tinting the windows of your fleet vehicles, you are ostensibly making your workplace safer. Ultimately, that helps to protect your financial interests. By reducing the chances that your employees will get skin cancer, you also reduce the risk that they could try to hold you liable for their injuries.

3. Tinted windows make driving safer.

Additionally, tinted windows make driving safer. Your drivers are less likely to encounter glare or sun blindness and thus less likely to crash. That protects your drivers, but it also helps to protect your company.

By having safe drivers on the road, you protect your brand image. Additionally, by reducing crashes, you help to keep your insurance rates relatively low.

4. Tinted window protect windscreens from shattering.

In addition to stopping glare, the film that is applied when you tint a window can help to prevent it from shattering in an accident. It essentially holds the window intact instead of allowing it to shatter.

5. Tinted windows protect upholstery.

As they block the UV light, tinted windows also help to protect the upholstery of your vehicles. If you ever have clients riding around in your cars, you need them to look especially nice, and upholstery that has faded, cracked or blistered in sunlight doesn’t create the positive image that you need.

6. Tinted windows can deter theft.

In the evening, whether your fleet of vehicles is parked in your carpark or in front of the homes of your employees, you want them to be safe. If your vehicles have tinted window, thieves or vandals cannot see easily inside of them, and that can act as a deterrent to theft.

Namely, if the thieves cannot see the valuables in the car, it removes the element of temptation, and they may be more likely to move on to another car.

If you’re ready to take advantage of these benefits, contact a local window tinting company. 

 

Read More

Advantages of Wireline Drilling Method

Several drilling methods and machinery are available for different drilling needs. Shallow drills can be done hydraulically, for instance, while deeper holes may require diesel power. Different drilling diameters can also be achieved for different purposes.  One drilling method that has fast risen to popularity is the wireline drilling method. Wireline drilling rods are designed specifically for the wireline drilling process. In this process, the diamond drill rods carry out drilling in a regular manner but the core is collected differently. With many drilling techniques, drilling has to be discontinued and the rods removed from the hole to facilitate core removal. After every removal, the drilling rods are then lowered back into the hole and drilling resumes. Since drilling rods range between one and three meters, boring a kilometer or two into the earth can be quite arduous.

Wireline Drilling is a process whereby the drilling apparatus expels the core without having to remove the diamond drilling rods. The core is expelled by use of a feature called an “overshot.” The overshot is attached to a wireline, and it winches the inner tubing that was used to capture the drilled core, out of the hole. Empty tubing is then lowered back. All this happens while the diamond drilling rods are still in position down the hole. Once the tubing is back, drilling resumes. Besides a considerable reduction in drilling time, there are two other advantages to this drilling technique.

Reduced danger

When drilling in areas prone to caving, wireline drill rods would be the best option to use. The outer barrel of the drill and the drill string remain firmly in position while the inner tubing removes core substance after every run. The material in the walls of the hole does not, therefore, get disturbed and loosen leading to a cave-in.

Increased bit life

In situations where the drill bit has to be removed after every run for core expulsion, the bit often loses its drilling “strength” or becomes dull quicker. The loss in “bit-life” can be attributed to constant re-drilling necessary whenever the apparatus is on re-entry to continue drilling. Cave-ins, especially, contribute to this loss of life. In the wireline drilling technique, the diamond drill rods are not subjected to this need for re-entry drilling. They will, therefore, achieve more drilling over longer periods of time before requiring change.

Finally, the less drilling time and effort accorded by wireline drilling technique translates to greater drilling distances. Kilometers of earth can be removed quite easily with this method as opposed to other methods.

Read More
Page 5 of 13« First...34567...10...Last »