Posts made in June, 2015

What to Avoid When Hiring a Plumber

Nowadays, hiring a plumber is as easy as finding their email address and sending them an email. Because it is so simple to get a hold of them, most people forget to ask the important questions that are imperative when it comes to hiring the right plumbers. In order to find the most experienced plumbers, you need to do more than emailing the first address you see on the Internet. Here are some of the most common mistakes that you should avoid when looking to hire a plumber.

Being unaware of the plumber’s specialty

While it is true that all plumbers are capable of fixing leaking faucets or dripping pipes, only a few of them are capable of installing hot water systems, or troubleshooting plumbing systems as well as unclogging hard-to-reach drains. More often than not, a plumber capable of doing one of these things specializes in it. Therefore, if you do not hire a plumber specialized in the type of problem that you have, chances are that the job will not be done as well as it should. Do not settle for plumbers who say that they can do it unless they can provide you with some certification that shows that they are trained in that field.

Also remember that some plumbers, like from South East Plumbing Service, offer 24-hour service. If you need emergency help, make sure you’re looking specifically for this type of service.

Not looking at reviews

Most reputable plumbers around the world have personal websites, which makes it easier for you to contact them. Some plumbers may not have personal websites, but it is possible that the company they work for does. The upside of this is that, as a result, people online are talking about them. Therefore, it is extremely easy for you to look up what others are saying about them and making an informed decision. Good reviews represent quality service, while no reviews might signify a new plumber which should be vetted further.

Assuming what you will be charged for the service

One thing you should never do when hiring a plumber is assuming what they will charge for their service. Make sure to get a quote for the job before letting the plumber start fixing the problem. Get different quotes from reputable plumbers and then compare that with your budget, choosing accordingly. If you’re on a tight budget, you could go with the cheapest option, but in the plumbing industry you get what you pay for, so if you are looking for a perfectly done job, you might have to pay more in order to get it.

Read More

Preventing Falls When Working on Rooftops: 3 Safety Equipment and Tools for Height Safety

When working at heights exceeding two meters, Australia’s Occupational Health and Safety Regulations requires all workers to implement proper fall prevention strategies. Having the right tools and equipment can save lives. Understanding the type of fall equipment and tools that are recommended can help you comply with the regulations to prevent getting fined, and to avoid tragic accidents.

This article will look at the 3 most commonly recommended equipment and tools for working on rooftops:

Safety Meshes to Catch Falls Indoors

Safety meshes are basically designed to prevent falls from the roof for if you were to fall into the home. They offer long-term protection for workers who are building or reconstructing an otherwise unstable roof. The safety mesh should be made from wire with a diameter of no less than 2 mm and with a capability of handling at least 450 megapascals tensile strength.

Extreme caution must be executed to ensure that the safety meshes are securely connected to the adjacent structures. In addition, there should be sufficient overlap between adjoining meshes to handle the forces of a person falling.

Guard Rails for the Edges

As safety meshes can only prevent internal falls, it is crucial to place barriers at the edge of the rooftops to prevent falls from the edges. All workers must only work on the sides that have guard rails set up. Guard rails are highly recommended because they are cost-efficient and effective. They are the preferred safety equipment over fall arrest harnesses, static lines and other safety equipment and tools.

The guard rails chosen must comply with AS 1657-2013, and be strong and corrosion-resistant. Guard rails must be installed by professionals to ensure utmost stability and security.

Catch Platforms

Just in case your workers fall over the guard rails, have catch platforms set up. These temporary platforms are placed below the work area to catch workers in the event of a fall, and should be positioned as close to the underside as possible. The catch platform has a portion that extends out to catch the fallen workers.

The catch platforms must be constructed to handle the maximum potential impact load, which will vary for each construction project. Catch platforms can also act as scaffolding, which gives them a dual purpose.

Conclusion

If you are unsure whether the height safety equipment and tools are integrated properly at your construction site, speak with a professional height safety company immediately. It is best to take the time and effort to reinforce the safety equipment to ensure proper protection to prevent an unexpected and tragic accident occurring. Contact a company like Australian Height Safety Services to learn more.

Read More

Sparkling Tiles | 3 Simple Steps to Upscale Wall Tiles with Grout

Bathrooms and kitchens are perhaps the most used rooms in the home − they are also subject to excess heat, moisture and stains because of how they are used. That’s why over a prolonged period, tiles and grout in bathrooms and kitchens can start looking discoloured and unsightly − especially if homeowners neglect caring for their wall tiles properly. Applying fresh grout has an uncanny knack for making timeworn wall tiles look fresh and upgraded almost instantly. Whether you have ceramic or porcelain tiles in your bathroom or kitchen, follow these simple steps to upscale the look of your wall tiles with fresh grout application. 

Gather Materials

Before getting started on grouting wall tiles, you will need to gather the proper tools and equipment to complete the job efficiently. You will need clean water, grout mix, a bucket to mix grout, a putty knife, a grout float, a grout sponge and a grout saw. All the materials you need for grouting wall tiles should be available at your nearest home improvement store. 

Remove Old Grout and Mix New Grout Thoroughly 

Using the grout saw, remove any residual and damaged grout as much as possible, before proceeding with the re-grouting process. Make sure that all the loose grout has been completely taken out to apply the new grout seamlessly. Remember not to apply too much pressure while trying to remove the grout, as you may mistakenly damage or chip the adjacent tiles. When mixing new grout, be sure to follow the manufacturer’s instructions to reach the desired consistency. Always start by using smaller quantities of water for mixing the grout in a bucket and add more water gradually when needed. This will help ensure that the grout doesn’t become too runny with excess water — runny grout is unlikely to hold on the wall tiles effectively. 

Apply Grout 

Apply the mixed grout on the wall tiles using a putty knife. You will need to ensure that you fill in all the empty spaces completely. Use the grout float to remove the excess grout from beyond the grout lines. Let the grout dry along the lines for a few hours. Once you have allowed the grout to dry completely, you may dip a sponge in water and wash off the excess grout from the wall tiles and other areas for a thoroughly neat finish. Ensure that you wring the sponge thoroughly, because excess water can weaken the grout and dislodge the wall tiles. 

Applying grout to wall tiles in bathrooms and kitchens on your own is a lot simpler than you think. If you follow these simple steps, your wall tiles will have a new-looking appearance almost instantly. If, on the other hand, you would like to replace your wall tiles, then contact a company like Herrmann Tiles.

Read More