Posts made in March, 2015

Reasons Timber Wall Frames Are Beneficial To Your Home

Although traditional stick frame homes may seem convenient and cheap, they are far from being sustainable. Steel frames, on the other hand, may be beautiful but they also cost a pretty penny. If you were looking for an ecological design that boasts both durability as well as efficiency, then timber wall frames would be the most logical addition to your home. These frames are constructed using large beams and attached with wood pegs, thus eliminating the need for any metal fasteners or nails. In addition, they are strong and quite aesthetically appealing. Here are some reasons why timber wall frames would be beneficial to your home.

Pocket friendly

When constructing a new home, your main concern would be your budget. Timber wall frames are much more pocket friendly than their steel frame counterparts are. When being manufactured, only the necessary beams and posts are produced, thus eliminating any waste that may come from excess wood. In addition, the size of these frames makes it quite cumbersome to transport cross-country. Which means homeowners have to make use of the local resources, which enhances your local economy. Steel frames, on the other hand, tend to be imported, which is quite costly for both the home builder as well as the local economy that misses on that investment.

They are durable

Timber wall frames make use of large pots, making them have a longer lifespan than conventional stick frames. As time goes on, their wood dries further and hardens, making them sturdier. This durability spills over to their resistance to natural disasters. Most timber wall frames can endure heavy winds, inches of snow as well as minor earthquakes without you having to worry about replacing the beams. All this contributes to their lifespan that spans into hundreds of years.

Environmentally friendly

If you were looking to reduce your carbon footprint, timber wall frames would be your best bet. For one, they are energy efficient. Once constructed, they have a greater allowance of interrupted space between their vertical members. This gives you more allowance for insulation ensuring that your home does not lose heat. In addition, the production process for these wall frames is much more energy efficient than the production of steel frames. Therefore, you can rest assured that the construction of your home is eco-friendly.

Lastly, timber wall frames are easier to indulge your creative side with. Your contractors can play with different embellishments and experiment with various designs depending on your artistic vision for you home. This is much harder to do with steel frames without your budget increasing exponentially.

For more information, contact a business such as Wonson Frames & Trusses.

Read More

Types and uses of scaffolding

In the construction industry, workers need a platform where they can work with their materials even in high buildings. That’s where scaffolding comes in. These structures enable the constructors to do just that and currently their designs are in plenty. If you are a construction worker just starting to get your feet wet in this industry, or you’re intending on designing a scaffolding, then you need to know about scaffolding. Here are some of the major types of scaffolding.

Supported scaffolding

This is the most common scaffolding type and it’s what you’ll see in most construction projects. It’s mainly used where there is need for elevation. If the workers crew is large and it’s going to take a lot of weight, ensure you add some extra support at the base.

Its construction is usually started from the base upwards. This is one of the most convenient and cost effective ways of designing a scaffolding, that’s why it’s so common.

Suspended scaffolding

This form of scaffolding is used when there is need to access higher levels or storeys in a building or when constructing a base is not possible. The structure is normally suspended from the roof. It would be very impractical to build a scaffolding from the ground levels to the higher storeys of the building.  

This kind of scaffolding is applicable when workers need to clean windows on high storey buildings or make repairs to the exterior of the upper floors.

Rolling scaffolding

This is almost similar to the supported scaffolding, the only difference being its ability to move. Rolling scaffolding doesn’t offer a rigid base rather, it’s got castor style wheels that enable it to move around. This is a type of mobile scaffolding and before using them, you need to ensure you remain safe. Their ease of motion makes them much more dangerous than the static scaffolding that don’t move. Lock the wheels whenever workers or materials are on it to keep it safe.

This type of scaffolding is normally used when you need to complete work over a longer distance. It is also mainly used when the construction is happening on two separate sites. This is because mobile scaffolding are made to be easily disintegrated and then reassembled elsewhere.

Aerial lifts

These structures are able to move between separate storeys and carry materials and workers to and from these levels. Aerial lifts are mainly used where the workers need to simultaneously work on different levels so as to complete a construction project.

For more information, check out companies such as Tower Access Hire Pty Ltd.


Read More

6 Common Types of Joints in Custom Joinery

There are different advantages attached to installation of custom joinery in the home. The specialist woodworking task ensures that the timber features have resilience, advanced functionality and remarkable aesthetics. Custom joinery ensures that the space in your property will be utilized appropriately and that your preference is taken into account during the renovation or construction project.

There are different types of joints used to ensure that the connections between the pieces of wood in the home are strong. Each technique delivers different results so understanding the available options will help you make ideal decisions for professional and DIY joinery tasks.


This is the most basic joint created by placing two wood pieces against one another. The end of one board is simply positioned over the edge of the other and the connection is secured with glue or nails. The butt joints are the weakest and in joinery, this option is typically reserved for use when making panels with narrow boards.


The doweled joint is similar to the butt configuration. However, one of the pieces has dowel pins and the other has small holes to allow a secure lock so it is a more favourable technique. Glue is used to secure and advance the quality of the results and the durability.


This is basically a corner joint which is created by cutting interlocking rectangular sections on the edges of two lumber pieces. When they are joined together, there is pressure exerted from the two sides which ensures that they are secured in the position.


The dovetail is considered to be one of the most intricate and strongest joinery techniques. The edges of the two wood pieces are cut into interlocking fingers but unlike the finger joints, the cuts are diagonal. These joints are beautiful and the possibility of bond breakage is quite low.


The mitre joinery technique is usually applied when creating right-angled corners but it can ideally be used for any angle size. Basically, the edges of the two timber pieces for your home feature will be cut in an angle which is half of what the whole angle should be. The pieces are usually joined together with screws or glue. Since it is somewhat similar to the butt joint, it is not a very strong choice.


This joinery procedure involves cutting a groove in a piece of wood and inserting another board along the slot. Though it is a simple technique, the bond is often strong when used in structural woodworking.

Read More